Silver Hardtop Thumb Screws with D-Rings, 6-Piece Set

Six silver hardtop thumb screws with D-ring handles

This set contains six hardtop fasteners. Each assembly has a silver-colored thumb-screw head, an attached D-ring, a threaded shaft and a black pad at the contact face. The ring and shaped head provide a grip for turning the fastener at a compatible hardtop mounting point.

Match these screws to the receiving threads and mounting arrangement on your vehicle before ordering. Check the required thread diameter and pitch, usable screw length, contact-face area and clearance around the head and ring. The six-piece quantity alone does not establish compatibility with a particular hardtop or vehicle.

Confirm the mounting position

Compare the original fastener and the top's mounting instructions. The screw needs enough thread engagement to secure the mounting point without bottoming out before the top is seated. Check that the head and pad sit correctly on the intended surface and that the ring clears trim, brackets and adjacent panels.

Confirm the vehicle model, year, top configuration and the exact mounting positions with the supplier. This set has no verified vehicle-specific application list or thread specification. Retain any other bolts, panel knobs or latches required by the top's original mounting arrangement.

What is included

Quantity

Six assembled hardtop fasteners

Color

Silver-colored heads and rings, with black contact pads

Handle design

Shaped thumb-screw head with an attached D-ring

Threaded section

One projecting screw shaft per assembly; diameter, pitch and usable length require confirmation

Receiving hardware

Separate receiving nuts are not shown; check the hardware required by your mounting points

Fit checks

Vehicle and top configuration, receiving thread, engagement, contact area and ring clearance

Removal and reinstallation

Follow your vehicle and hardtop instructions for supporting the top, releasing all required fasteners and reconnecting any equipment. Turning these screws is only one part of the removal process. After refitting, confirm every required mounting point is secured using the specified procedure before driving.

Keep the set together while the top is off. The D-rings have no confirmed working-load rating. Use designated rated anchors for cargo, lifting or recovery.