INJORA Hardened Steel Drive Shafts for TRX4M High Trail K10 F150, 23g/Set

Overview

INJORA hardened steel drive shafts replace the stock shafts on a 1/18 Traxxas TRX4M High Trail K10 or F150 crawler. The set has two shafts, one shorter and one longer, and weighs about 23 g (0.81 oz). Each shaft is a steel tube with a scale-style joint at both ends, and the INJORA mark is printed on the tube.

This is an INJORA upgrade part for the TRX4M, not a Traxxas part.

Specifications

Brand

INJORA

INJORA part number

4M-84BK

Material

Hardened steel

Weight

About 23 g (0.81 oz) per set

Shafts in set

2, one shorter and one longer

Joint type

Scale-style joints at both ends

Compatible models

1/18 Traxxas TRX4M High Trail K10 and F150

Design details

• In phase design, so the joints at each end of a shaft are set in line with each other.
• D-shaped and rounded rectangle holes at the shaft ends connect to the transmission and axles for a tighter fit.
• Scale joint and spline diameter sizing for a realistic look.

Before you order

Confirm your crawler is a 1/18 TRX4M High Trail K10 or F150. INJORA does not publish the length or diameter of each shaft, so measure your stock shafts if you need an exact size match. The holes at the shaft ends are D-shaped and rounded rectangle, and the stubs on your transmission and axles need to match those shapes.