Left rear exhaust bracket 68275662AB for Ram 1500 2019-2024

Left rear exhaust bracket, replacement reference 68275662AB

This replacement bracket is listed for selected 2019-2024 Ram 1500 exhaust applications with 5.7L or 6.2L engines. It carries reference 68275662AB for the left-side bracket. Confirm the required part by VIN and the installed exhaust layout before ordering.

One bracket with a bent hanger arm

The pictured bracket has two vertically arranged mounting holes, ribs between them, a short side projection and a bent hanger arm with an enlarged end. One gray bracket is shown. Mounting bolts, a separate exhaust isolator and exhaust pipes are not pictured.

Replacement reference

68275662AB

Listed vehicle range

Selected Ram 1500 applications, 2019-2024

Listed engines

5.7L and 6.2L; confirm the exact vehicle and exhaust configuration

Position

Left rear exhaust bracket

Pictured supply

One bracket

Mounting face

Two circular holes arranged vertically

Hanger form

Bent arm with an enlarged end

Compare the mounting face and hanger position

Check the hole spacing, bracket offset and hanger-arm position against the existing part. Match the arm to its mating exhaust isolator. Those dimensions and the bracket's material grade are not specified; appearance and engine size alone do not establish fit.

Check the mounting area and isolator for damage when assessing the repair. Use the service instructions for the actual truck to support the exhaust, replace the bracket and tighten the required fasteners. After fitting, confirm that the exhaust is correctly supported and has clearance from the body and nearby components.