Benedict Harry +20mm Wheel Hex Hub Adapters 4Pc for 1/8 ARRMA Typhon 6S

+20mm wheel hex adapters for the Typhon 6S

This set has four wheel hex hub adapters for 1/8 scale ARRMA Typhon 6S cars and trucks. Each adapter moves its wheel outward from the stock position, which extends the track width. The supplier credits the wider stance with better rollover resistance and climbing ability.

The adapters are aftermarket upgrade parts listed under the Benedict Harry brand. They are not made by ARRMA.

Listed specifications

Listed brand

Benedict Harry

Fitment

1/8 scale ARRMA Typhon 6S

Set contents

4 wheel hex hub adapters

Offset

+20mm as listed; the listing does not state whether this is per side or total

Color

Black, as pictured

Material

Not stated in the listing

What the wider track does

Wheels mounted on these adapters sit farther from the body shell than wheels on the stock hubs. The supplier lists this as a way to improve anti-rollover performance and climbing ability, and as a step toward running wider tires. Installation and removal are described as easy.

Because the wheels sit farther out, check the body shell, fenders and body mounts for interference after fitting.

Adapter design in the photo

The photo shows four black adapters with machining marks on the hex faces. Each piece has a hex face with a center bore at each end, a slim hex nut section, a smooth barrel and a small hole near the flange edge.

Before you order

Hex size, axle diameter and material are not stated in the listing information available for this part. Compare the adapters with your stock hubs before ordering.

• Confirm your model is a 1/8 scale ARRMA Typhon 6S.
• Check the hex and axle fit against your current wheel hubs.
• Measure body shell and fender clearance, since the adapters extend the track width.