3-Port Boost Solenoid Mount Bracket Kit for MAC/AEM Applications

A separate mount for your boost control solenoid

This bracket kit provides a mounting point for a matching three-port boost control solenoid. The listing identifies MAC and AEM applications, with fit determined by the actual valve body and mounting holes. The kit contains one silver-colored holder and three fasteners. The solenoid valve, boost controller, wiring and hoses are separate.

What the holder looks like

The holder has an open central recess, three round openings across the upper section, two threaded holes along the rear edge and a lower mounting ear with a recessed hole. The supplied hardware consists of one socket-head bolt and two slimmer countersunk-head screws. Check these shapes against the valve and the mounting location you intend to use.

Product

Three-port boost control solenoid mounting bracket kit

Bracket quantity

One silver-colored holder

Included hardware

One socket-head bolt and two countersunk-head screws

Listed valve applications

MAC and AEM three-port solenoids with a matching body and mounting arrangement

Mounting features

Upper openings, two rear threaded holes, central recess and a lower mounting ear

Not included

Solenoid valve, controller, wiring, air fittings and hoses

Match the valve before choosing the bracket

Read the complete part number on your solenoid and compare its mounting-hole spacing, body dimensions and screw requirements with this holder. MAC's Series 35 catalog shows different individual, stacking and manifold arrangements. A three-port description alone does not establish that every version will fit.

For an AEM valve, identify the exact model as well. AEM publishes instructions for its 30-2400 boost control solenoid, but confirmed fit of this bracket to that specific model is not established here. Obtain the bracket's hole spacing and fastener dimensions before ordering if you cannot compare it with your existing mount.

Plan room for the connections

Check the mounting surface and leave room for the hose fittings, electrical connector and service access. Confirm that the supplied screws suit the valve and do not interfere with its body or ports. Follow the valve and controller instructions for hose routing and electrical setup; this kit supplies the mechanical holder only.